Hand Stretch Film vs Machine Stretch Film Selection Guide
2026-10-23Stretch film secures cartons, bags, and mixed goods to a pallet by combining film tension with surface cling. Weide Chuangyi supplies linear low-density polyethylene stretch film in hand and machine formats. Packaging volume, load shape, film width and thickness, and wrapping equipment determine the suitable format.
The published product range covers widths from 100 to 1400 mm, thicknesses from 0.018 to 0.050 mm, and a 76 mm core. Confirm the final specification against the actual load and the dispenser or wrapping machine.
What Stretch Film Does
Stretch film is an LLDPE winding film. An operator or wrapping machine stretches the film as it is applied. The film clings to adjacent layers and creates holding force around the load. The wrapped layers help contain goods during loading, unloading, storage, and transport. They also provide surface coverage against dust and moisture.
Stretch film uses mechanical tension and self-adhesion. Heat tunnels belong to shrink-film systems and sit outside this selection guide. A stretch-film trial should focus on load containment, film breaks, corner punctures, overlap, and layer cling.
Hand Stretch Film and Machine Stretch Film
Both formats use LLDPE and perform the same core task. The application method controls film tension, overlap, wrapping speed, and operator involvement.
| Selection point | Hand stretch film | Machine stretch film |
|---|---|---|
| Application method | An operator applies the film by hand or with a dispenser | A pallet wrapper applies the film through a powered film carriage |
| Tension control | The operator adjusts pull and overlap during wrapping | Machine settings control stretch force, carriage speed, and overlap |
| Load pattern | Useful for mixed load sizes, irregular shapes, and multiple wrapping locations | Useful for repeat pallet patterns and fixed wrapping stations |
| Production flow | Fits packing areas where operators wrap pallets as orders are completed | Fits lines that process a steady pallet volume |
| Trial focus | Operator reach, roll handling, corner tears, and layer cling | Machine compatibility, pre-stretch settings, film breaks, and cycle time |
Hand Stretch Film
Hand stretch film gives the operator direct control over overlap and extra reinforcement. It fits irregular loads, short production runs, and packing locations that use portable dispensers. The operator should keep consistent tension and cover the pallet base so the film anchors the load to the pallet.
Roll weight and width affect handling. A trial should include the operators who perform the work and the pallet heights they wrap during a normal shift.
Machine Stretch Film
Machine stretch film runs on pallet-wrapping equipment. The machine applies repeatable tension and overlap when the load pattern and settings remain consistent. Match the roll width, core, thickness, and unwind direction to the equipment manual.
Set the wrapper with a production load. Record the pre-stretch or film-force setting, number of top and bottom wraps, carriage speed, and overlap. These values create a repeatable starting point for the next roll and the next order.
Stretch Film Specifications to Confirm
The film specification should describe the product and the conditions in which it will run. Use the supplier range as a starting point and approve the order after a load trial.
| Parameter | Weide Chuangyi product information | Check during selection |
|---|---|---|
| Material | LLDPE | Confirm the film grade for hand or machine application |
| Width | 100 to 1400 mm | Match the load coverage and wrapping equipment |
| Thickness | 0.018 to 0.050 mm or 18 to 50 microns | Match puncture exposure, load weight, and stretch setting |
| Core | 76 mm | Confirm the dispenser or machine mandrel size |
| Functional properties | Self-adhesion, elongation, transparency, tensile strength, and tear resistance | Test cling, film breaks, corner punctures, and visibility on the wrapped load |
Film Width and Thickness
Film width controls coverage per revolution. A wider web covers more height, while the required width still depends on the pallet dimensions and the wrapping equipment. Thickness contributes to puncture and tear performance. Load geometry and stretch settings also affect film use, so thickness alone cannot predict containment.
Cling Elongation and Tear Resistance
Cling keeps overlapping layers together. Elongation allows the film to stretch around the load and develop holding force. Tear resistance helps the web pass corners and edges during wrapping. Evaluate these properties together on the actual pallet.
Transparency and Load Inspection
Transparent film keeps labels, carton markings, and load condition visible. Check label readability after the full wrap pattern is applied, especially where several layers overlap.
How to Select a Stretch Film
Record the Load
Measure the pallet length, width, and loaded height. Record the total weight, carton pattern, sharp corners, overhang, and any loose or compressible items. Note storage temperature and the handling route from the wrapping station to delivery.
Match the Application Method
Choose hand film for operator-applied wrapping and machine film for a compatible pallet wrapper. Confirm film width, core size, roll size, and available tension controls before ordering a trial roll.
Run a Production Trial
Wrap a normal production load at the planned settings. Inspect the pallet base, bottom layers, corners, top layers, and tail attachment. Move the pallet through the usual forklift and staging steps. Record film breaks, punctures, layer separation, load movement, wrap time, and film consumption.
Approve and Record the Settings
Approve the film after the wrapped load completes the required handling and storage checks. Record the film specification, supplier code, machine settings or hand-wrap pattern, and the date of the trial. These records support repeat orders and help operators investigate later changes in film use or load stability.
Stretch Film Strapping and Corner Protection
Stretch film contains grouped goods and covers the load surface. PP strapping adds a tension band for cartons and light industrial packages. PET strapping maintains tension on heavier loads and during longer transport routes. Paper corner protectors reinforce pallet edges and spread strap pressure across the package.
A shipping unit may use several components. Select each component for a defined task, then test the complete pack as one system.
Information to Send for a Stretch Film Trial
Send the supplier the pallet dimensions, load weight, daily pallet volume, load photos, film application method, storage conditions, and transport route. For machine film, include the wrapper model and current settings. For hand film, include the dispenser type and preferred roll size.
Weide Chuangyi Packaging lists hand stretch film and machine stretch film in its Winding Film Series. Use the product range to identify a trial specification, then confirm performance on the actual load before placing a production order.
FAQ
Is winding film the same as stretch film
The Weide Chuangyi product category uses Winding Film Series for hand and machine stretch film. Buyers also use the terms stretch wrap and pallet wrap for this product group.
Does stretch film need heat
Stretch film develops holding force through mechanical stretching and layer cling. The wrapping process does not use a shrink tunnel.
When should I use hand stretch film
Use hand stretch film when operators wrap pallets manually, load sizes vary, or wrapping takes place at several packing locations. Confirm the roll size and width with the dispenser and the operator.
When should I use machine stretch film
Use machine stretch film on a compatible pallet wrapper when the line needs controlled tension, overlap, and cycle settings. Test the film at production speed with the normal pallet pattern.
Can stretch film and strapping be used together
Yes. Stretch film contains and covers the load. PP or PET strapping adds concentrated holding force, and corner protectors distribute pressure at the edges. The load design determines which components are required.